Mini60 Bluetooth Android HF ANT SWR Antenna Analyzer Meter For Ham Radio Hobbists 1-60 Mhz
FEATURES
• mini size: 91mm * 53mm * 25mm
• weight: 300g
• with 3.7v li-on 1500ma battery(rechargeable)
• Support for Android 2.2 -4.0 or new version, supports 3--10 inch mobile phone and tablet,
• support windows via software
Bluetooth connection method:
1, The installation software Andrews
2, Press the SET button to open the talent PC link
3, Press the DOWN button to confirm dc plug in the Bluetooth antenna head
4, Open the Bluetooth phone paired with the day assigned for 1234
5, Open Android software click the link prompts the connection point of the scan is completed successfully
• Automated antenna SWR analyzer
• Hardware:
o Precise and self-calibrating reflectometer design measures forward and reflected signals and impedance data
o Display 2x16 with optional backlight
o Precision DDS signal generator (AD9851) used as signal source
o USB port only for battery charging
o Buzzer
• Operation:
o Manual control option displays SWR and complex impedance at selected frequencies
o Automatic scanning results displayed as frequencies of lowest SWR and complex impedance
o Battery operated for field use or use external 13.8V wall adaptor
o Power saving modes
o Multi-point calibration for better accuracy
• Instrument Capabilities:
• Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance
• Measure feedpoint impedance
• Measure ground loss
• Adjust antenna tuners and determine loss
• Measure inductors and capacitors
• Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance)
• Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance
• Determine characteristic impedance of transmission line
• Determine length of ¼ and ½ wave phasing lines
• Coaxial Cable Loss
• Determine antenna tuner loss
• Measure balun loss
• Measure inductor Q
• Estimate quartz crystal parameters
• Measure magnetic loop resonance and SWR
SPECIFICATIONS
• Frequency Generation & Control:
o 1 - 60 Mhz
o Source impedance: 50 Ohms
o Stability: +/- 100 ppm
o Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
o Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
• Usable Measurement Range:
• SWR: 1.0 to 9.99
• Impedance: approx. 5 to 2000 ohms
• Adjustable: 2.0 Volts pp (typ)
• 3.7v li-on battery
• External: 12 to 14 Volts DC, 500mA
• RF Output:
• Power supply: DC 12-14V
Controls:
• Push buttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
• Switch: "Power On"
• USB: Mini-B receptacle
• External power: 2.1mm Power Jack (center pin positive)
Package includes:
1* Mini HF ANT SWR Antenna Analyzer
