Product Show

X108G HF QRP Ham Radio Outdoor Edition Amateur Transceiver

X108G Outdoor is X108's upgraded version, It is a compact single conversion HF transceiver covering 0.5 to 30 MHz. Special optimized the Receive Channel, It has lower Background noise; and higher SNR, Up to 0.25uV&12dB；Equipped with a 2.3k SSB filter and a 500 Hz CW narrow-band filter, Excellent filtering characteristics. It includes a switchable AGC circuit, Large dynamic range. Other features include a preamplifier and signal attenuator, RIT control for SSB use, and RF output power variable from 1 to 20 Watts.  The front panel meter can display incoming signal strength, RF output power and VSWR, and the transceiver includes high VSWR protection circuitry to guard against potential damage to the output stage caused by antenna mismatching. The RF output stage features imported RF MOS tubes and APC circuitry for constant output across all bands.  A noise blanker (NB) module is available as an option, as is a high stability 0.5 ppm TCXO module. Its performance to meet the FCC (or CE) certification requirements. X108G outdoor version equipped with a color OLED solid-state screen, Ignoring the strong outdoor sunlight irradiation, still clear. Has four full aluminum handle for better protect the machine.

Radio Parameters
Basic parameters
Frequency range: Receive: 0.5~30MHz（Continuous）
Transmitting: All HF Amateur bands including WARC bands
Operating mode: SSB（J3E）
CW （A1A）
AM （A3E）
minimum frequency stepping: 1Hz
Antenna impedance: 50Ω
Operating temperature range: -10℃ ~ +60℃
Frequency stability: ±0.5ppm @ Open the power about 5 minute , -10℃~+60℃
Operating voltage: 12~14.5V DC
Current draw: Receiving: 600mA @Max
Transmitting: 7.5A @ Max
Dimensions (mm): 120*45*180（mm） [Does not include the Front and rear handles and the Knob etc bulge.]
Transmitter parameters
Transmitter power：More than 15W（@13.8V）
Modulation mode: SSB balanced modulation:
AM Low level modulation
Spurious response rejection: ≥40dBc
Carrier suppression： ≥45dBc
IF filter： SSB 2.4kHz(-6dB)
CW 500Hz(-6dB)
Receiving parameters
IF Frequency: 10.7MHz
receive sensitivity: 0.5uV(PRE ON，≤2.0MHz）
0.3uV (PRE ON，＞2.0MHz）
Receive Frequency bands:
1.8~2.0MHz
3.5~4.0MHz
5.0~5.5MHz
7.0~7.3MHz
10.0~10.2MHz
14.0~14.5MHz
18.0~18.2MHz
21.0~21.6MHz
24.8~25.0MHz
28.0~28.8MHz
0.5~30.0MHz （*）
Dynamic range: Better than 90db
RIT Frequency control range: ±1kHz
audio output: 0.5W@8Ω

Each Unit Package Contain:

1 x X108G Radio

1 x USB Cable :

 The X108G can be connected to the PC via the USB cable, realize software control and software update .

1 x Power Cable

Red and black two-core parallel copper wires.

Length is 1 M.

The side use Two-Pin IDE connector attached to the rig; Other side is open , customers can choose according to their needs connections.

1 x Microphone 

A multi-function digital microphone is supplied as standard, allowing direct operation of many transceiver functions without the need to touch the front panel.