Radio Tecsun AN-200 AN200 DESKTOP For MW Loop Antenna
Product Introduction
The Tecsun AN200 tunable indoor AM loop antenna can dramatically improve the reception on AM (Medium Wave) stations throughout the entire AM broadcasting band. This AM Antenna enhances reception as well as adds clarity to the ferrite AM antennas that are included with all home stereo receivers and portable radios. The AN200′s loop design offers you the reception that normally would only be achieved with a very long wire hooked up directly to your radio. With the AN200, it will work on all portable radios without wires attached. The Kaito AN200 features a built-in tuning dial that allows precision tuning to the appropriate station and the selectivity to block out unwanted stations and noise; which without the antenna would crowd or “bleed” into the desired signal. The antenna can also be adjusted by physically turning the loop in the direction of the station’s broadcasting and pointing it directly at the station. One of the best features of this antenna is the possibilities of using selective tuning, loop adjustment and radio dialing. The AN200 Loop Antenna will give you an added dimension to your AM radio by giving you better reception, clearer sound, better clarity of the stations you already get and enhancement of stations that would otherwise be drowned out. The Kaito AN200 AM Medium Wave Loop Antenna is a passive (NO power requirements) radiant device that works by either placing it next to the portable radio’s internal AM rod antenna or by connecting it to larger desktop radios that have AM antenna terminals by using the included 1/8″ to bare wire cable.
Technical Specification
* Features: Antenna loop
* Better AM reception and sound
* Works with and without Antenna Input jack
* All direction receiver – place in different directions to get a better signal
* Frequency: 520KHz to 1710KHz.
* Not need for battery or the external power supply,environmental friendly design.
* Dedicated tuning knob designed for the frequency tuning.
* Built-in output socket to output the signal directly for using with the radio which has the external mediumwave antenna input socket (the connection cable coming in the package has the 3.5mm stereo standard plug only).
* The loop diameter of this AN-200 antenna is 230 mm / 9 inch.
* Easy to setup and use with the radios which has the inside ferrite mediumwave antenna or has the external mediumwave antenna input socket (the connection cable coming in the package has the 3.5mm stereo plug only).
Features:
1. Working frequency coverage on mediumwave broadcasting band: 520-1710KHz.
2. No battery or the external power supply required, green design.
3. AN100 medium wave annular antenna can perform it’s best function by moving to the right direction.
4. Connect the AN100 medium wave annular antenna to the audio modulator, car radio or medium wave line-in socket of BCL radio. If the radio without medium wave line-in socket, the annular antenna can be placed nearby the radio and closed to the radio’s MW build-in antenna.
5. Set the radio at medium wave band. Then roll the tunable button on AN100 medium wave annular antenna to receive the best frequency signal until the sound from broadcasting channel is clear and stable.
6. Dedicated tuning knob designed for the frequency tuning.
7. Built-in output socket to output the signal directly for using with the radio which has the external mediumwave antenna input socket (the connection cable coming in the package has the 3.5mm stereo standard plug only).
8. Diameter of the loop is 9 in/230 mm.
9. Easy to setup and use with the radios which has the inside ferrite mediumwave antenna or has the external mediumwave antenna input socket (the connection cable coming in the package has the 3.5mm stereo plug only).
10.The Diameter of AN200 is 9 inches.
11. AN200 with Convex Stand.
Package Include:
1* TECSUN AN-200 Antenna
