NanoVNA-F VNA SWR Meter VHF UHF Antenne Analyzer + 4.3 IPS LCD + Metal Case Vector Network Analyzer 50KHz-1000MHz
NanoVNA-F firmware release 0.0.5, measuring frequency to 1.5GHz!
1.support measurable frequency to 1.5 GHz,
default setting 1 GHz, accurate measurement up to 1.35GHz.
2.fix: unexpected
0.3dB offset of s21 in thru
3.fix: mark all
off bug
4.fix: clutter
display when standing wave ratio is infinite
5.add version
& info command
6.add REAL IMAG R
X trace format
For more
information, visit: http: //deepelec.com/2019/12/30/nanovna-f-0_0_5/
Features:
Use 4.3-inch IPS
TFT LCD and resistive touching screen, with a larger view angle and can be seen
clearly in strong outdoor light.
Switch to a large
capacity 5000mAh/3.7V lithium battery, longer standby time, and expand a USB
interface. Usually, it can be used as a power bank when the instrument is not
used.
The Lipo charing
IC to be changed to IP5306 (with 2A high charing current), making the charging
time shorter.
Use a larger and
better operating level.
Use a larger and
better operating power switch.
Support Chinese
and English menu switching.
Upgrade the user
program by virtual U disk (16MB SPI flash memory inside).
Standard aluminium
housing to protect SMAhead and reduce the interference of external
electromagnetic waves to instrument.
The NanoVNA-F
measurement ranges is 50k-1.5GHz. Use the harmonic of the clock chip SI5351 to
measure frequency up to 1000MHz. At 600M-1GHz, the S11 has a dynamic ranges of
40dB (the standing waves ratio is less than 1.02).
The RF front end
is designed with a metal shield that allows the S21 to have a dynamic ranges
better than 60dB over the full frequency ranges.
Specifications:
Main material: PCB
Color: black
Type: with battery
Battery: 1 *
lithium battery, 3.7V, 5000mAh
Measurement
frequency: 50KHz~1500MHz
RF output: -13dBm
(Max.-9dBm)
Frequency
accuracy: <0.5PPM
Port SWR: ＜1.1
Display: 4.3 inch
IPS TFT (800*480)
USB interface: USB
Type-C
Communication
mode: CDC (serial)
Power consumption:
USB 5V 200mA, can use battery powered, maximum charging current 2A
Output capacity:
5V/1A
Number of
calibration points: 101
Number of scanning
points: 101
Display tracking:
4, Marking: 4, Setting save: 5
Scanning time:
about 1.9s/time (50KHz~1000MHz full frequency band)
Can measure S
parameters, voltage standing waves ratio SWR, phase map, group delay, Smith
chart and so on.
Item size: 140 *
75 * 20mm / 5.5 * 3.0 * 0.8in
Package size: 145
* 85 * 30mm / 5.7 * 3.3 * 1.2in
Package weight:
413g / 0.9lb
Package list:
1 * NanoVNA-F VNA SWR Meter VHF UHF Antenne
Analyzer
2 * 200mm SMA-JJ
RG316 Cable
1 * Set of
Calibration Parts
1 * SMA-JJ Double
Needle
1 * SMA Elbow
(external screw inner hole to inner screw inner needle)
1 * Type-C Data Cable
