Diamond SX-600 SWR Dual Power Meters SX600
Diamond Antenna SX600 Dual Band SWR Power Meter HF 6M 2M 1.8 - 160, 140 -525 Mhz
Brand: Diamond
Manufacturer's Part Number: SX600
Part Type: SWR/Wattmeters
Product Line: Diamond Antenna SX600 Dual Power Meters
DXE Part Number: DMN-SX600
Size: W155 × H63 × D103mm
Weight: 630 g
Frequency range: S1 (1.8 to 160MHz), S2 (140 ~ 525MHz)
Power measurement range: 5W 20W 200W
Power measurement accuracy: ± 10% (F.S)
Measuring the minimum SWR power: S1 (1W) of S2 (4W)
Insertion Loss: S1 (0.2 db), S2 (not more than 0.3 db)
Measurement functions: the SWR of PEP monitor power traveling wave reflected wave power
The input interface: the M-J
Display lighting: lighting DC13.8V power to connect external sensors, the sensor switch LED display
Power supply: 13.8V
Sensor: The sensor system (S1/S2)
13.8V power meter is used for lighting. The normal measurement does not require.
Meter Frequency Range: 1.8-160 MHz
Meter Frequency Range 2: 140-525 MHz
Minimum Power Range: 5 W
Middle Power Range: 20 W
Maximum Power Range: 200 W
Meter Style: Sweep needle
Meter Illumination: Yes
Peak Power Readout: Yes
Peak Hold: No
Built-In Frequency Counter: No
Meter RF Connector Type: UHF female, SO-239
DC Power Required: Yes
External Power Input Voltage: 12 Vdc
Remote Sensor Included: No
SWR/Wattmeter Width: 6.000 in.
SWR/Wattmeter Height: 2.000 in.
SWR/Wattmeter Depth: 4.000 in.
SWR/Wattmeter Weight: 2.00 lbs.
Notes: Separate HF through 2 meters and UHF inputs; single switchable meter.
Diamond Antenna SX600 Dual
Power Meters provide a switchable selection of metering from one of two
directional couplers in one box!
Select the 1.8 to 160 MHz coupler for your Low-Band/VHF rig or select the 140
to 525 MHz coupler for your VHF/UHF rig. Since there are two separate couplers,
you can leave the SX600 in-line with both rigs at the same time! The SX600
measures forward/reflected power and SWR using a single sweep meter.
With three full-power scales of 5, 20, and 200 watts, the SX600 provides handheld,
QRP, and high power operating levels. With most of today's rigs providing 200
watts or less, the SX600 will satisfy the vast majority of transceivers. Their
compact size makes these meters useful for testing both base and mobile
installations.
Low insertion loss and accurate readings mean that your station will operate to
peak efficiency. Speaking of peaks, these meters will read peak watts, as well
as RMS! That's so handy when operating SSB on HF or VHF/UHF bands!
Note: For additional product information, please look at the files under the
'Documentation' tab.
When you need the features and flexibility of a dual-input power/SWR meter, one
of these Diamond Antenna SX600 Dual Power Meters from DX Engineering is the
obvious choice!
Package Contain:
1 x Diamond Antenna SX-600
